Incredibly easy, but incredibly cute tutorial from AnneKata! These wonderful simple paper stars would be awesome for party decoration, or just around the house!
A site for all of my own DIY project successes and failures and for posting all of the amazing tutorials and projects I find as I go - while staying on a budget and keeping as much money in my pocket as possible!
Saturday, July 7, 2012
Friday, July 6, 2012
Thursday, July 5, 2012
DIY $220 Bracelet for $5
For this cheap, fun and easy bracelet / necklace from Henry Happened's Blog you’ll need:
- 3 yards of silk ribbon cord. I got mine (purple, of course) at JoAnn’s in the trim section.
-
2 dozen 8mm gold beads.
Cut
the ribbon into 3 equal lengths. Standard bracelet size is 7 inches so
you’ll want it about 29 inches long in order to wrap 4 times.
Start by braiding about 6 inches of ribbon and then secure the end with
a rubber band. Anchor the end with something heavy to hold in it place.
Start
braiding in the beads by feeding the ball onto the middle strand and
then tightly braiding the other two strands around it. Don’t pull too
hard though or the beads will have a tendency to pop out as you go.
Continue feeding beads onto the middle strand until you run out (I had about 25) or until there’s about 6 inches of ribbon left.
Finish with another 6 inches or so of braiding. Then clamp the ends with ribbon fasteners or just tie it in a knot.
It looks great as a bracelet or a necklace!
Labels:
adult crafts,
bangle,
bracelet,
budget,
cheap,
cheap crafts,
craft,
craft tutorial,
crafting,
crafting on a budget,
crafts,
crafts on a budget,
DIY,
do it yourself,
lesson,
trends,
tutorial
Wednesday, July 4, 2012
DIY Project: Ruffly Felt Wreath
Thanks to Design Sponge for this amazingly done tutorial that is so easy I'm pretty sure it can't be real. ; )
We are so excited to give this one a whirl!! Can you imagine all the different color mixes you can do for ANY holiday, sports party, wedding, or whatever else you can think of...just love it.
What you’ll need for the wreath:
- a 12 inch Styrofoam wreath form
- approximately 2 1/2 yards of felt
- straight pins (enough to match the number of felt circles needed, plus two for attaching the hanger)
- scissors
- a 3 inch circle template
- a pencil
- ribbon for hanging
- approximately 2 1/2 yards of felt
- straight pins (enough to match the number of felt circles needed, plus two for attaching the hanger)
- scissors
- a 3 inch circle template
- a pencil
- ribbon for hanging
Making the Felt Rosettes
Using a pencil and your circle template, trace circles onto the felt. Cut the felt circles, and
fold them in half twice to form rosettes. Insert a pin near the bottom
corner of the rosette, about 1/8 inch from the corner.
Attaching the Felt Rosettes
Attach the felt rosettes to the wreath form, making sure to group the
rosettes tightly enough that no Styrofoam is showing through the
rosettes. After you’ve added a few, fluff and adjust the rosettes to
your liking. Continue making, pinning, and attaching the rosettes until
you’ve worked your way around the wreath form. If you have circles that
are slightly misshapen or that have a little pencil or ink on them,
place them toward the outside or inside edges, where they can’t be seen
when the wreath is hanging.
Wreath Back
This is what my wreath looked like on the back when I was finished.
As you can see, I started off with ball point straight pins, but I
switched to flat head pins when the rosette count started to get up
there and I had to run out and buy more pins. If you use flat head pins,
then I suggest using a thimble to push them into the wreath form, or
your thumb will take a beating. Ask me how I know.
Wreath Hanger
After you’ve finished adding the felt rosettes, cut a 5 inch length
of ribbon, fold it in half, and attach it to the wreath form with two
pins to form a hanger.
Wreath Finished
I love how organic the wreath looks when it’s finished. The ruffly
felt rosettes, when grouped together like this, remind me a bit of a
coral reef. While this is a rather ambitious project, I think it was
completely worth the time spent. I’ll be using my wreath year ’round as
part of my home décor!
Labels:
adult crafts,
adults,
art,
crafts on a budget,
door,
door hanging,
door wreath,
felt,
felt crafting,
holiday,
home,
home decor,
indoor wreath,
party,
party ideas,
party on a budget,
wreath
Tuesday, July 3, 2012
Tuesday Tutorial: Paper Lantern Ornaments
Want a cute, simple decoration that you can make in minutes?
These paper lanterns from The Creative Place are perfect! Make a bunch and string them together as a garland, or put a bunch in a bowl, or in a hurricane glass in a bathroom or guestroom.
What you'll need:
- Paper - enough to cut 15 strips - ½"x4" (7.5"x4")
- 2 small brads
- Ruler, 1/16" hole punch or pushpin to poke holes, exacto blade or
rotary cutter and a cutting mat
What you'll need:
- Paper - enough to cut 15 strips - ½"x4" (7.5"x4")
- 2 small brads
- Ruler, 1/16" hole punch or pushpin to poke holes, exacto blade or
rotary cutter and a cutting mat
1. Measure out and cut your paper into 15 strips - each strip ½"x4"
2. Punch holes 1/8" from edge on short edge on both
ends of paper strips. I used a 1/16" hole punch, but a push pin can be
used to poke holes - it might take a little longer to get the brad
through.
3. Put a brad in each end of your punched paper strip stack.

(Back)
4.
Starting with the strip on the bottom, twist it out to begin to unfold
the paper lantern. It might look kind of wonky, but it will get better
:)
5. Twist out each strip individually in order from bottom to top of paper strip stack.
6. Arrange to your liking and Voila! A paper lantern ornament!
These would make a great garland - I strung a few together and they looked fabulous!
Monday, July 2, 2012
diy project: peaches’ coffee filter flowers
Materials:
for 10 grapefruit size paper peony flowers
- 60 standard size coffee filters
- 2 tubes of water based paint, similar in tone (yellow/orange or pink/red or blue/purple, etc..)
- 3 cups of water in 3 separate containers
- 10 plastic drinking straws
- Masking tape (make it green tape if you want a covered stem, but any tape will work fine)
cost:
$6 total for 100 filters, 2 tubes of craft paint, 1 roll of masking tape, and 10 drinking straws (okay, those were free!). Add $6 to buy special green masking tape (totally optional).
- 2 tubes of water based paint, similar in tone (yellow/orange or pink/red or blue/purple, etc..)
- 3 cups of water in 3 separate containers
- 10 plastic drinking straws
- Masking tape (make it green tape if you want a covered stem, but any tape will work fine)
cost:
$6 total for 100 filters, 2 tubes of craft paint, 1 roll of masking tape, and 10 drinking straws (okay, those were free!). Add $6 to buy special green masking tape (totally optional).
time: 1 hour to dye and assemble + 3 hours drying time.
Instructions:
1. Prepare three dye baths; deep, medium, pale. Divide your filters into three separate groups; inside/deepest color/10 filters, middle/medium color/20 filters, outside/palest color/30 filters, and submerge in dye baths. Remove after one minute for pale color, or remove after 1 hour for more intense results.
1. Prepare three dye baths; deep, medium, pale. Divide your filters into three separate groups; inside/deepest color/10 filters, middle/medium color/20 filters, outside/palest color/30 filters, and submerge in dye baths. Remove after one minute for pale color, or remove after 1 hour for more intense results.
2. Wring filters to remove excess water and dye. Separate filters and
hang to dry. Once they are thoroughly dry, organize your filters by
depth of color: deep/inside, medium/middle, pale/outside
3. Fold and snip. Cut one small hole in the middle of each filter and trim jagged edges around the rim. The deepest color filters should have the most ragged edges, while the palest filters should have mildly curvaceous edges. note: Keep filters in stacks at all times!
3. Fold and snip. Cut one small hole in the middle of each filter and trim jagged edges around the rim. The deepest color filters should have the most ragged edges, while the palest filters should have mildly curvaceous edges. note: Keep filters in stacks at all times!
4. If you want leaves on your flower, trim from previously dyed green filters now (optional). note: The leftover trimming bits on this are GORGEOUS, consider saving them for fun projects in future!
5. Lay out components to make one flower: 1 deepest color filter
(inside), 2 medium color filters (middle), 3 pale filters (outside), one
drinking straw, masking tape.
6. Do yourself a favor and tear off four 2“ pieces of masking tape before you start to assemble.
7. Take the deepest color filter and twist in the center. Tape the twist to the tip of the drinking straw. Take the drinking straw and insert in the center hole you snipped into the two middle layer filters.
7. Take the deepest color filter and twist in the center. Tape the twist to the tip of the drinking straw. Take the drinking straw and insert in the center hole you snipped into the two middle layer filters.
8. Pull the middle layer up around the inner layer, twist, and tape.
Pull the outside layer up around the inside/middle layer, twist, and
tape.
9. To add a stem, tear off 12” of green tape and attach leaves at
random intervals. Wrap and twist tape down around the drink straw, snip
at desired length. Gently pull back petals and behold your beautiful
paper peony!
note: Expect the first flower to take ten minutes and come out
looking poorly. The second will improve mildly, but not much. Stick
with it! Number three will be beautiful and take less than a minute. Get an
assembly line going and you will have a paper garden in an afternoon!
Sunday, July 1, 2012
Subscribe to:
Posts (Atom)






