DIY: Balloon False Ceiling

Wants and Wishes blog has a fantastic last minute idea for that New Year's Eve party!  If you've been debating how to jazz up the home for the festivities - here you go!!  Visit them for more ideas.

 

 1. Blow up all of the balloons you would like to use. I wanted a variety of colors of balloons so I used 2 different colors of purple, 3 different blues and silver. I think it turned out really well to have the mix of colors.

2. Roughly arrange the colors the way you would like them, this will help when your tying them together that you don't have all the same blues together, but a even mix of colors. (Note I used almost double the amount of silver balloons since I have different shades of blues & purple balloons).

3. Tie them together with string or curly ribbon. Don't tie them too close as they need a lithe room in between. I tie them together so you have 2 rows of balloons- one hanging on the right then one on the left.

Here is a picture with one strand hung up so you can see how full one strand can be. You can add as many strands of balloons you need to create the depth of your area.

DIY: Anthropologie Inspired Snow Globes

Zomoc.com has a wonderfully easy DIY - there aren't really any instructions, but these look pretty self explanatory!  We could see us whipping up a few of these wonderful gifts for far less than what Anthropologie is charging for them....

DIY: T-Shirt Bracelet Makeover

Here is another option for t-shirt upcycling into jewelry that we think just couldn't be easier to do.  This is from Family Chic's blog and there are plenty more tutorials on there, so be sure to pop over and check 'em out!  

These would be great bracelets to make out of the sleeves of your t-shirts that you may have used for other DIY t-shirt projects...

For this project you will need some old t-shirts and a bunch of bangle bracelets. Try using old bangles that you already own, check thrift stores or pick up some up for a few dollars at Target, Walmart – or even the sale bins at Old Navy.

Cut t-shirt in 1/2" to 1" wide strips. Depending on the thickness of the bangle – a thick bracelet will need thicker strips.

Loosely tie one end of the t-shirt strip to the bangle and start wrapping fabric around bracelet – the tighter the better.

Wrap fabric all the way around until you meet the first knot – untie the knot and tie both ends together to close. Make a double knot, pull it tight and make sure the knot is positioned on the inside of the bracelet. Trim ends with scissors.

I found this technique worked well for us – but you could also use a glue gun to secure ends.

DIY: Party Animal Necklace

These are whimsical, creative, and we adore Flamingo Toes blog for putting them together!  What do you think?  Do you love them like we do??  We must find an occasion to wear one of these bad boys...

Here is what you’ll need:

• Animals (I got these at Michael’s – and I think they are the same animals they used. They were in a tube – take your 40% off coupon)
• Beads, chain, ribbon, fabric, rhinestones, wire, etc for embellishment
• 22″ chain and closure findings for necklace
• bails (to make the animals into pendants)
• Glue (I used E-6000)

We’re going to start with the elephant so you can see what I did, then I’ll show you closeups of all of them.
The beauty of these though is that you can dress them up any way you want!

Start by gluing a rhinestone spacer to the top of the elephant’s head.

Add a colorful bead on top of that.

I think he likes his hat. :)

Cut a piece of ribbon for his blanket.
(I got this gorgeous jacquard ribbon from my lovely sponsor, The Ribbon Retreat. I have a nifty project planned with it but this little scrap made a perfect blanket piece.)

Glue to the back of the elephant.

Trim the blanket with a small piece of chain.

Add a strip of rhinestones between the blanket and the tail.

Wrap a bit of wire around each foot.

Glue a bail to the elephant’s back, towards the top.

Let everything dry thoroughly before you add your chain.

Cut a piece of chain the length you want your necklace to be (I cut mine 22″).
Feed the chain through the bail.

Add the closure pieces to the ends of the chain. I used a lobster clasp on one side and a jump ring on the other.

Now you have a super cute Party Animal Necklace!!

Here are some shots of the others so you can see how they’re dressed up.

Our zebra has a crown (lucky him!) and a fabric blanket.

Our giraffe likes rhinestones and sequins. Snazzzzy.

Our tiger is wearing a pompom collar (all the cool tigers do) and some chain around his middle. He has a flat bail, which was easy to cover with the chain.
Here’s a pic before I wrapped it.

Aren’t they fun??