DIY: Santa Belt Napkin Rings

Kaboose's blog has these adorable (and crazy easy to make) Santa belt napkin rings that would be ideal for your holiday table!  Wouldn't you just love to sit down to these cuties at your table?  We think that they are very whimsical and fun!  

 

What you'll need:

• Cardboard tube
• 1 sheet each of red, white, and black felt 
• Gold chenille stem
• Scissors
• White craft glue

How to make it:

1. Cut cardboard tube into 1-1/2-inch segments.
2. Place one piece of the tube onto the red felt and cut the felt just slightly wider than the tube. Wrap the felt around the tube and trim off the excess, leaving enough for a small overlap. Glue the red felt around the cardboard tube. (See photo.)
3. Cut a strip of black felt, about 1/2-inch wide, and glue it around the red tube, lining up the seams. (See photo.)
4. Cut two strips of white felt, about 1/4-inch wide and glue them around the outside of the red felt, overlapping the edge a little.
5. Cut a 3-inch piece of gold chenille and bend it into a square for the buckle. Glue the buckle to the black felt, be sure that the seam is on the opposite side. Let everything dry completely. (See photo.)

Tips:

1. These can also be made with construction paper or craft foam.
2. Instead of gold chenille, you can use gold glitter glue, but you will need to take into account the drying time needed.
3. These will look just as good on fancy napkins as they will on rolled up paper towels!

DIY: Cone Santa Hats

Thrifty Decor Chick took her Stein Mart inspiration to a whole new level!  These wonderful Santa hats look just like the ones from the store and we think they'd look awesome in our foyer...hmmm!

I saw some cute Santa hat/suit decor things in Stein Mart a couple months ago and Tweeted about them, saying I could totally make them for cheaper. Well, I decided to go for it, yes. I. did. I started with three foam cones, in different sizes:

I got them all for about $10. I think I used a coupon on the largest. If you can catch them on sale, you could spend even less!

I found red velvet at Hob Lob for less than $5 – I only got 22 inches (the width is 54”) and didn’t even use all of that. I figured out the size by rolling the cones and then cutting the fabric:

I hot glued the fabric down the back and then on the bottom and top to secure the ends:

I almost used sparkly red felt, but went with the velvet to the get look I really wanted. Either would be adorable and the felt would be even cheaper!

Then, I got four inches of vinyl (that looks like leather) to make the “belt.” This was less than $2 and I didn’t even need four inches…I only ended up making it 2.5 inches wide:

Again, just with some hot glue, I wrapped it around and secured it. Then, the fun part – the fur. I got some fluffy stuff in the ribbon section at Joann’s to use for this:

Isn’t it adorable? It looks like Santa’s beard! I’m dying.

For the buckle, I found a package of little square crystals. This package had 52 and I used most of them. I figured out the size and shape I wanted before I hot glued them on:

A fluffy puff ball on top, and it was done. And I squealed! I did!:

I wasn’t happy with the old Christmas candles I had in this tray (which was a $1.99 tray I got at Goodwill and spray painted white) and I hadn’t even spray painted the bottom of it well enough yet, so I just filled it in with some Dollar Store ornaments:

My favorite part is the blingy buckle!:

What do you think? The Stein Mart version is on the left, mine on the right:

(Mine are looking a little pink in this pic, but they are a deep red.)

Stein Mart had three sizes – I think about $9, $15 and $20 each. My three cost about $25 total. (And I had fun making them!)