DIY: Mini Cake Stand

Having a Spring / Easter / ANY party?  Love cake stand DIYs?  Shaken Together's blog has an absolutely adorable mini cake stand that we don't think they could have made easier if they had tried!  We love the simplicity, but the beauty of this project.  

Be sure to head to their blog for more info and more DIY!

I purchased two inexpensive sets of solid colored dishes - one granny smith apple green and one black - inverted the cereal bowls, attached the dinner plates with scrapbooking glue dots (super sticky and easily removed) and my cake plates were born!! 

Here they are in action - sorry, this was the first picture I could find without digging out my CD of hundreds of pictures! 

We made chocolate and vanilla cupcakes with home made buttercream and offered chocolate jimmies, green sugar, coconut and mini chocolate chips ... it was a hit!

 

These would be sweet made with thrift store finds for a Mothers' Day tea, heritage dishes for an anniversary party or fun brightly colored mix & match plates and bowls for your kiddo's birthday party ... use the coffee mugs and salad/dessert plates for smaller cake stands with a little more quirky character :)  The best part is that they can be whipped up in a pinch and stored easily!
Hope you were inspired to {try this}!  And hope you want to hang around a while!  There are lots of ways to follow along ... check out my side bar.  I'm hosting a weekly Pinterest link party, too - scroll up to the top to stop by this week's party!  And I'll be sharing the amazing brownie recipe pictured above in the very near future ... you definitely don't want to miss it!

DIY: Cone Santa Hats

Thrifty Decor Chick took her Stein Mart inspiration to a whole new level!  These wonderful Santa hats look just like the ones from the store and we think they'd look awesome in our foyer...hmmm!

I saw some cute Santa hat/suit decor things in Stein Mart a couple months ago and Tweeted about them, saying I could totally make them for cheaper. Well, I decided to go for it, yes. I. did. I started with three foam cones, in different sizes:

I got them all for about $10. I think I used a coupon on the largest. If you can catch them on sale, you could spend even less!

I found red velvet at Hob Lob for less than $5 – I only got 22 inches (the width is 54”) and didn’t even use all of that. I figured out the size by rolling the cones and then cutting the fabric:

I hot glued the fabric down the back and then on the bottom and top to secure the ends:

I almost used sparkly red felt, but went with the velvet to the get look I really wanted. Either would be adorable and the felt would be even cheaper!

Then, I got four inches of vinyl (that looks like leather) to make the “belt.” This was less than $2 and I didn’t even need four inches…I only ended up making it 2.5 inches wide:

Again, just with some hot glue, I wrapped it around and secured it. Then, the fun part – the fur. I got some fluffy stuff in the ribbon section at Joann’s to use for this:

Isn’t it adorable? It looks like Santa’s beard! I’m dying.

For the buckle, I found a package of little square crystals. This package had 52 and I used most of them. I figured out the size and shape I wanted before I hot glued them on:

A fluffy puff ball on top, and it was done. And I squealed! I did!:

I wasn’t happy with the old Christmas candles I had in this tray (which was a $1.99 tray I got at Goodwill and spray painted white) and I hadn’t even spray painted the bottom of it well enough yet, so I just filled it in with some Dollar Store ornaments:

My favorite part is the blingy buckle!:

What do you think? The Stein Mart version is on the left, mine on the right:

(Mine are looking a little pink in this pic, but they are a deep red.)

Stein Mart had three sizes – I think about $9, $15 and $20 each. My three cost about $25 total. (And I had fun making them!)

DIY: Christmas Present Topiary

That Village House has a wonderful idea for decorating either the inside of your house or outside of your house with a large topiary!  We could totally see this being made in a mini version using dowels and smaller boxes as a great center piece for a table!

pletely done, but I thought I would share it with you anyway.

I started with 3 different sized boxes...9, 12 & 14 inch cubes.

I used an ice pick to punch holes in each of them so that I could run a rebar through them. (It's easier to do the holes first, before getting them all wrapped & pretty.) For the smaller boxes, I slightly off-centered my holes, so that the boxes would tilt on each other.

Then I wrapped them and made bows for each.

Tip: Keep your wrapping paper pattern running the same direction.

Tip #2: Before you poke holes through the paper, put a little tape on it. It will help the paper from ripping.

I also made sure my seams were right down the middle of the boxes so that the ribbon would cover them up. And I used double-sided tape to hold the ribbon and bows in place. I'd love to take credit for these tidbits, but again, I straight up copied this idea!!

DIY: Felt Holiday Tree(s)

Danielle Thompson is keeping us inspired and in the Christmas spirit.  We love these felt trees and can't wait to give them a try!  Check out her blog for more DIY!

   

First I wanted to give credit to my initial inspiration for these (b/c it is one of my pet-peeves when people don't give proper credit... grr.. i've seen this happen so many times to other people, and even me... and it just makes me so sad. I try very hard to always give proper credit! although unfortunately with all of the things i bookmark, i do lose track sometimes where i got the idea in the first place. But very very rarely.) 
My inspiration for this actually came from a project (no surprise!) from Emily Martin/The Black Apple last year. I had the idea of making these felt trees in my head this year, and knew the concept was hidden in my subconscience from SOMEWHERE, and then i remembered her trees from last year. :-) But after looking at them for the first time this year, i realized they're pretty different! But same concept...
I wish I could provide some patterns for the felt pieces, but #1, as I've mentioned, I don't trust my pattern making skills, especially when it comes to fabric! and #2, I'm not sure that all styrofoam trees are standard sizes at all craft stores, so the patterns might end up being off depending on where you buy your tree forms.
But essentially the shape will look something like this and get smaller as you layer up the tree:
 
You just freehand cut the scallop along the bottom of the shape. It doesn't have to be perfect, and I sort of like the freehand look: :-)

To start:
1. Cut out your pieces of felt. I used generally 3-5 pieces/colors of felt per tree depending on how layered you want it to look. For each color tree, I used 3-5 shades of one color to show a gradiation of the darkest shade to the lightest shade going towards the top. On some I did a dark-light-dark-light look as well. Whatever worked with the shades of felt that I had. I used wool felt, but you could also use craft felt at craft stores... it's cheaper, but not as pretty, and you won't have the same amount of color shades as you'll find in wool felt.. i got mine online.
The first layer will be your bottom layer. It won't have the scalloped edge b/c it will wrap around the bottom of your tree form. You'll need to snip the area that wraps around like this so that it will fold over with little bulk. Then just hot-glue to the bottom:
 
Then you can glue a circle of felt to cover your bottom completely.
(I used 3 different sizes of tree forms: small, medium and large. So if you do try to make a pattern, you'll need to make a different pattern for each size/shape tree as they will of course differ.) I basically just winged it with each layer of felt... wrapped the fabric around and just cut away til i got generally the shape that i mentioned above. Then i wrapped it around hot-glued, where the ends met, to the tree form, overlapping:
 
 
Since I knew my that my trees would only be seen from the front, i didn't stress too much about how they looked on the back. As you can see, the backs of mine look a bit haphazard. They still look tidy at least. If you wanted, and you know they'll be seen from all sides, you could add a strip of ribbon along the seam on the back like I did here, vertically:
  
 
If you want to be REALLY tidy, you could wait on adding the vertical strip of ribbon, and first wrap your trims and ribbons around the tree horizontally and when you're done with that, you could add your vertical strip of ribbon to hide all of the felt seams/ribbon-ends on the back. Or just leave the felt seams as-is. It really doesn't look bad, as long as you overlap the ends so that no foam shows through. If you're a sewer, you could even sew the ends together on each felt layer and slip over the form!
The great thing about using these styrofoam forms is that you can also pin things to it (as you can see I used lots of pearly colored pins). And that is actually even easier than having to use hot-glue constantly. I'm not a big fan of glueing (i don't totally trust it!), so i try to use it only if i have to. But you'll definitely want to add some hot-glue to reinforce everything.
2. Ok you're done adhering your felt layers, it's time to embellish. You can start adding your trims and ribbons to wrap around the tree horizontally. (or you can leave them as-is with no embellishment! sort of a more modern look) I wanted to embellish, but not overly, still keeping a somewhat clean design (well, clean for ME at least).

DIY: Glitter Trees

I Heart Nap Time's blog is kicking off the beginning of December with some excellent Glitter Trees that are amazing decor and eye candy.

Check out their page for more holiday DIY!

Here’s what you’ll need:

-3 Styrofoam trees: sizes 15×5, 12×4, and 9×4

-3 small candlesticks (you can find these at just about any thrift store for about 50 cents)

-spray adhesive

-glue: Elmer’s glue for the glitter and a stronger glue like E6000 to glue the tree to the candlestick

-glitter in your favorite 3 colors (we found these awesome colors of glitter at hobby lobby)

-white spray paint

Here’s what you’ll need to do:

- give your tree a good coating of the spray adhesive. you can use the elmers glue for this part, but the spray adhesive covers better and gives a nice smooth finish, plus it’s a lot faster. leave the bottom of the tree undone, this will get glittered at the end.

- once you have your tree coated in glue, cover it completely with glitter. when all 3 trees have been glitterized set them aside to dry.

- next take your 3 candlesticks and give them a couple quick coats of white spray paint. then let those dry completely. 

- now take your E6000 and glue the candlesticks to the trees. it’s best to let them sit overnight. (keep an eye on it though. on one of the trees the glue ate away some of the styrofoam and my tree tilted to the side. so just check on it for the first hour or so.)

-  when everything is completely dry, flip them over and cover the remaining part with glue and glitter. (we used the elmers glue for this part)

- then all you have left to do is decide where to put them!!

DIY: Pine Cone Garland

Twig & Thistle's blog has a great DIY that has a simple but elegant look.  I love the way that it has a natural look but really brings the holidays into the home.

Also, I spotted this door decoration that uses the same materials that would make a lovely companion to the garland. Instead of stringing the pine cones to the ribbon simply tie a ribbon to each hook then tie all the ribbons at the top and hang!

What You’ll Need:
Pine Cones
Ribbon
Screw Hooks
Hole Punch
Scissors

Instructions:
1. Begin by measuring your mantel or space that you’d like to hang your garland and cut your ribbon. Remember to leave extra for hanging. Once you’ve determined the length, space your pine cones out as you like on a flat surface. The pine cones I used were fairly large so I kept about 4 inches between each one. On the back of the ribbon discreetly mark where each pine cone will go, then punch a hole with a small craft punch. I used an 1/8″ round circle punch like this one.

2. Once you know how many pine cones you’ll need, screw in one screw hook into the top of each pine cone. This takes a little practice and you may need a little elbow grease but once you get the hang of it it goes pretty quickly.

3. Poke each hook through the hole you’ve made in the ribbon and hang! Easy as pie and something that will last for seasons to come!

DIY: Apple Placemats

With Thanksgiving just around the corner - we think it'd be super easy to adjust this DIY from Bloesem Kids' blog for fun Pumpkin Placemats!  

Apple Placemats by Courtney Russel from Two Straight Lines
As we celebrate the harvest season here in the US, it's nice to get the kids involved in decorating the holiday table.  These cute apple placemats are painted using a freezer paper stencil, a technique easy enough for kids.  Freezer paper can be found at many grocery stores or online, but be careful, once you start you'll be stenciling every thing in sight.

You will need:
*Burlap
*Scissors
*Printed fabric
*Fabric glue (I like Alene's Tacky Glue)
*Red and Brown Textile Paint (I use Jacquard Paint)
*Paintbrushes- 1 wide, 1 narrow
*Freezer Paper
*Iron
*Heavy Weight Paper
*Marker

Step one:
Cut your burlap to 13" x 17".
Step two:
On the heavy paper, sketch your apple, refining your drawing until you're happy.  Cut the apple out and trace around it on the paper side of the freezer paper.  Cut the apple out of your freezer paper, making sure that the area surrounding the apple is uncut-- this is your stencil.
Step three:
Place your stencil on the burlap where you would like it and iron it in place.
Step four:
Using the wide paintbrush, paint the area inside of your stencil with the red textile paint (tip: I used both foam and bristle paintbrushes and preferred the bristle).  Carefully peel your stencil away. Using the narrow paintbrush and the brown paint, paint the stem on your apple.
Step five:
Cut a leaf from your printed fabric.  Glue it next to your stem just above your apple.  If desired, use the marker to draw pretend "stitches" on the leaf.
Step six:
One at a time, pull four or five threads from each edge of the placemat to create a fringe.
Step seven:
Repeat until you have a placemat for every seat at your table.