Friday, June 22, 2012

DIY Puffy Paint Wall Art

What a great idea from Virginia & Charlie's Blog!  Using Puffy Paint on wax paper they were able to transfer a great pattern (see below) onto canvas with mod podge (be sure to check out my blog on how to make your own Mod Podge for a fraction of the cost!).  
 
You can pick any pattern or words to trace over!  We are thinking quotes from your favorite people.  You don't have to use white puffy paint either - get colorful and maybe even get the glitter puffy paint and go all out...
 
We'd love to see what you come up with for yourself!
 
I found this pattern on Pinterest.  I love the colors together, but I really love the pattern.  I decided to use this as my inspiration for a project.  I've got a lot of blank canvases around so I thought I'd use one up.

I drew my own pattern and then used puffy paint on top of wax paper to draw it out.

Thursday, June 21, 2012

DIY Pinwheel Cupcake Toppers

We can see 100 uses for these!  Who doesn't love pinwheels?  You could adjust this same idea for place card holders, hand made cards, larger toy versions, home decor...have fun!

Bertie's Bakery has a whole section on DIY and Freebies...so check 'em out!

PinWheelTopper-3
PinWheelTopper

Step 1:
Cut out 2”x2” squares of what ever color double sided paper you want! (Double sided paper just means paper that is going to have either color or designs on either side, instead of just white…unless that’s what you want of course!)
Step1
Step 2:
Cut diagonal lines starting from each corner going into the center about 1”. You do not need to flip over the paper, I just wanted to show you my two sided paper!
Step2
Step 3:
Now fold the first corner (A) into the center of the square. Don’t crease this fold, just kind of bend it so it holds its shape. Do this to each “A” corner on the squares.
Step2a
This is what your squares should look like once you have molded/folded each of the A corners inwards.Step3
Step 4:
Now take each pinwheel and cut a small slit in the bottom of one of your folds. This only has to be big enough to slide a toothpick through. I like doing it this way because it hides the toothpick and glue, and it just looks a little bit cleaner. If you do not have a blade to do this with, no worries we can just glue the toothpick to the back. 
Step4
Step 5:
Open up all of your folds and slide the toothpick through your newly made slit. Hot glue toothpick to the center of the square.
Step5
Step 6:
Using little dabs of hot glue start re-folding in each “A” corner and folding them there until the glue has cooled and the fold is now permanent.
Step7
Keep going all the way around.
Step8
Step 7:
Once all the corners are folded in and glued, add one more dab of hot glue and adorn the pinwheel with any thing you like. I used fake pearls that I had saved from an old necklace I used to love! But you could use buttons, pompoms, or even paper circles from the left over paper.
Step9
See wasn’t that easy?
PinWheelTopper-7

Wednesday, June 20, 2012

Braided Headband Tutorial

MaryJanes and Galoshes blog has a wonderful braided fabric headband tutorial.  It has minimal materials and it's budget friendly!

What you need:
Thick hair tie
Six 1" strips of fabric
Bulldog clip or safety pin
Sewing machine (or needle and thread)
Fabric tac

I ripped my fabric strips so they were a bit frayed on the edges, personal choice.  Clip three strips together and braid. Did I mention this is going to be really easy! Your braids should be about 6 inches short of going around your head.


Tack each end of the braid just enough that it doesn't come undone .

 

Then tack both braids together on each end, be careful not to twist the braids.



Cut your hair tie so it's one strip of elastic.
 
Sandwich your elastic ends between the ends of your braids on each end, again, careful not to twist the braids.
 
Sew over the elastic so that it's secure.  With a scrap of your fabric, wrap the ends of the braids for a finished look.  I used fabric tac for this.
 
Your done! 
 

Tuesday, June 19, 2012

Making Fabric Covered Binders

The Uncluttered Lifestyle has a gorgeous tutorial on how to cover those institutional looking plastic binders with fun and elegant fabric!  Do your own take and shoot us pictures!
Supplies: 
- Fabric (For 4 binders use approx 2 yards)
- Binder
- Spray Adhesive
- Book plates 
 
Cut the fabric to size, leaving a 1/2" to 1" to fold over all the way around.
Cut each corner so there is not a bulge when you fold over on the top and bottom of the binder.
Adhere the fabric to the front first flap. Then close the binder and adhere fabric to the spine, following with the back flap. If you adhere the fabric while the binder is open, the fabric will be too snug when you do try to close it.

It should look something like this. Yes I know my "hem" is uneven but it doesn't matter because...
The next step is to cut a piece of fabric to cover the inside and adhere it. Now it has a finished look when it opened.
Lastly, I applied the book plate.  I think the silver looks gorgeous with the ticking.


Pretty simple, right. Each binder costs a total of $6.50 to make. The most expensive part was the ticking fabric at $6.97/yard. So really, this project could be accomplished for less. But I think the end result is just darling!

Monday, June 18, 2012

Tissue Rosette Kissing Balls

The Idea Room blog has a great way to jazz up any room!  We think you could also make ornaments out of these great flowers, too.  Have fun with it!  

Supplies:
- Streamers in fun colors
- A foam ball for the center
- Glue gun

That's it!

First off you will need a couple of rolls of tissue paper streamers. You can find them many places in many colors. Mine were $1 each.
 Photobucket
Start by cutting the paper into strips about 24 inches long. Then crumple them up to make them softer {this part is optional, depends on what look you like–experiment}. Then fold the top 1/3 of it down so it is not as wide. {again…optional}
 Photobucket
Now take your strip and start on one end and begin rolling it up between your fingers.
 Photobucket
After you have a few rolls, continue to roll it up but now twist the paper.
 Photobucket
Now just continue to roll and twist until you have reached the end of the strip. I liked to add a drop of hot glue to the end so they did not unravel.
Photobucket
After you have a few rosettes made, start gluing {I used a glue gun} them onto a round styrofoam ball. I used 2 and 3 inch ones to make them in different sizes. Just glue them close together and fit them in where they sit together nicely.
 Photobucket

Sunday, June 17, 2012

DIY Marbled Glassware

Honestly...WTF has a great tutorial from graphic designer and artist, Joanna Bean Martin on how to make your own Marbled Glassware!  Take those nail polishes and get to crafting!

You’ll need:

  • flat bottomed glassware
  • variety of colorful nail polish
  • clear nail polish
  • a disposable plastic container
  • nail polish remover
  • painters tape
  • toothpicks
Mask off the bottom of the glass with painters tape.
Fill a disposable, plastic container with water. Open all the nail polish bottles and start dripping polish into the water, one color at a time.
Layer the colors one on top of the other. Take a toothpick and pull out the polish to create a swirly pattern, starting from the center. Work quickly as the polish will start to harden and clump up over time.
Submerge the bottom of the glass into the polish. Allow the polish to collect around the sides of the glass and pull out carefully. Little air bubbles may form but that is to be expected! Before marbling the next glass, take a clean toothpick and sweep up any excess polish from the water.
Allow to dry completely before applying a layer of clear polish.
Once everything has dried, remove the painters tape and touch up with nail polish remover and a cotton swab.
Your glowing glasses are finished! *Glassware should be hand washed only.
Bottoms up!

Saturday, June 16, 2012

Tissue Paper Wall Art

I am seriously in love with this idea from Mr. Handsomface.  A previous post had this fantastic idea, but here is another one from this site showing how fun this project really is.  It's crazy cheap too, so hey, it doesn't get much better than that right?  I have plans to give this a shot this weekend - so I'll follow up!

You just MUST go to their blog and see all the fantastic things they have done.



This project is super easy to do and so inexpensive. I think I spent under $10 for all the supplies. The canvas is really the most expensive part, but if you look around or aren't too picky about the size you can usually find a good deal.

The supplies you'll need:
  • canvas
  • tissue paper
  • glitter paper
  • Mod Podge
  • foam brush (or paint brush)
  • white paint (optional)
The optional prep-step is to paint your canvas with a coat of white arcylic paint first. I had to do that last time I did this project because I felt my canvas was a little grey, but this one was nice and white so I skipped that step. Side note: I've stopped trying to get all the kitties out of my DIY photos. They just love getting involved! Especially Marshall, he was all up my business during this one.

First, cut out a bunch of circles from the tissue paper and glittery paper. You should be able to find glittery paper in any craft supply store in the scrapbooking section. I used a penny and nickel as a template for my circles. If you fold the paper over on itself several times, one cut will give you a bunch of circles.

Next, arrange the confetti on your canvas to get an idea of where you want it to go. I liked how it looked when I concentrated more of the confetti in one corner and had it spread out across the canvas.

Once you're happy with the placement, start gluing them down with the Mod Podge. It works best if you spread some on the canvas first, lay the circle on top of it, then add another layer of Mod Podge on top of that. When all the confetti is glued down, add another quick coat of Mod Podge to even it out.

I'm really happy with the way it turned out. I even unknowingly matched my nail polish to the design! Guess I had pink dots on the mind this week. This would look great in just about any colours though. I'd love to do dark blue tissue paper with gold glittery paper.