DIY: Pumpkin Pie Potpourri

Thanks to Martha Stewart - who knows the most amazing ways to jazz up any home decor - we are featuring this wonderfully simple DIY on pumpkin pie potpourri.  It's so easy it's almost ridiculous - almost!

Plus now is the perfect time to cut into those pumpkins and they won't spoil!

Use a pumpkin incense burner to suggest the cozy scent of pie just out of the oven. Cut off the pumpkin's top and scrape out the innards; carve round vents with an apple corer. Rub cinnamon or pumpkin-pie spices onto the lid, or push cloves into it. With a lighted tealight candle inside, the pumpkin will give off a lovely fragrance for about six hours.

DIY: Upcycled Sweater Vases

Under the Table and Dreaming has such a unique DIY we just couldn't pass it up!  This is such a brilliant idea for upcycling an old sweater.  Check them out for more!

I have a little thing for cable knit sweaters {the chunkier, the better}. Now that I can feel the crisp chill in the air...it's the perfect time to re-visit this incredibly easy craft that I'm sure most of you already have the supplies to make.


The original March tutorial {here} was nothing short of cutting off the sleeve of a sweater and sliding it onto a glass vase. So easy peasy anyone armed with a glue gun could handle it. You can easily get two covered vases using both of the sleeves from one sweater. So what do you do after that; well here are a few options for the scraps before you go searching for another sweater to recycle.

The body portion of any sweater can be easily cut and sewn to cover larger vases that do not fit into a sleeve.

Larger Vase How to:
{1} Cut a sweater just below the arms, turn inside out. {2} Slide over the container you are wishing to cover; finished edge on the top side. Pull the sweater taut until the ribbing starts to curve in {as shown in the picture - You want this to fit snug} Pin in place. {3} Sew a straight seam {very easy, just a straight line - backstitching at each end} Flip right side out. {4} Slide over your container, hot glue the bottom edge down and trim off any excess fabric on the bottom.


The left over sections of sleeve that are too short to cover a full vase can simply be slid over a tall glass vase and folded at the top, leaving half of the vase exposed.


I used a few flameless candles to fill these vessels, as the candle light is so pretty shining through the cable knits.


The round vase looks like a challenge but it is just as easy as the rest.


Round Vase How to:
{1} Cut a single piece of sweater to fit around the desired round container. {2} Hot glue the finished edge of the sweater around the top of the vessel. {3} Work your way around the entire top, until you reach the beginning; leave the edges hang. {4} Flip the container over and begin to hot glue the bottom in small sections. {See the March tutorial {here} for tips} Be sure to keep the bottom as flat as possible.


{5} Work your way around the bottom leaving the 'open' seam section undone. {6} Using hot glue, glue one of the 'open' sides down. Trim the other sweater side so you have a nice clean edge. {This is super easy to achieve with cable knit as the guide lines are already there}. {7} Pulling the sweater taut, start to hot glue the remaining side; overlap to make sure you have the container completely covered. {8} Finish the bottom as shown in the March tutorial {here}.


I really like the unique round shape...and of course the variety of adding different cable knits.


Using these simple covering techniques you can instantly transform any type or sized container into warm and cozy fall decor.


I think I have found a start to my fall centerpiece.

DIY: Upcycled Dollar Store Candles

Libby Dibby has a great upcycle tutorial for Dollar Store candles.  We love the idea of taking something that is already usable, but making it so that it fits our home and decor - or even fits a holiday, party or wedding theme!

Check out their blog for more DIY!  This one couldn't be more simple!  We like instructions that are so easy they take up less than a paragraph.

We took Dollar Store candles, the kind with saints on them... And used ModPodge to secure tiny fabric scraps to them... They look even better than I expected them.

DIY: Halloween Tin Can Luminaries

Jolly Mom's blog has a very easy to follow DIY that features tin can luminaries.  There is still plenty of time to whip up these guys to line your steps or driveway.  Ideal for a party!

Head on over to her blog for even more DIY!

What You'll Need:

* Sharpie or marker in the same color as your paint
* Clean empty tin cans {I like to use the big coffee cans, any size will work}
* Hammer and large nail or awl
* Paint
* Paint brush
* Candles


Instructions

Fill the tin can with water and place it in the freezer. When the water in the can is frozen, remove the can from the freezer.

Using the marker, draw whatever image or word onto the tin can. You can freehand or print a design from the internet and then trace it onto the tin can. Keep the design simple though. Design Ideas: outline of a cat, a bat, a witch's hat, words like Boo or Happy Halloween.

Place the tin can on a folded towel. This will help brace the tin can and reduce the impact of punching the holes with the hammer.

Then, use the hammer and awl {or nail} nail to puncture the design in the can.

When you're done punching the holes, place the can under hot, running water to melt the ice.

Also, since water expands as it freezes, the bottom of your can will probably not be level. If not, then turn the can over, cover with a towel, and hammer down the edges until the bottom of the can is level.

Paint the tin can using either spray paint or acrylic paint. Once the the paint is dry, you'll probably have to go back with a toothpick and poke some of the holes through on the can since the paint can clog them up.

Place a candle inside the can and enjoy!

NOTE: You can also puncture one hole on either side of the tin can, attach a piece of wire, and then hang the luminaries as well!

DIY: Crayon Candles in Bottlecaps

We are forever questing to find bottlecap crafts that are easy and look good!  We love to knokw that we can upcycle these bad boys and make it look like we spent hours, when we only spent minutes.  

Craftaholics Anonymous has come to our aid with their DIY for turning old crayons and bottlecaps into mini candles!

these tiny candles are a really fun to make and come together quickly. AND you can up-cycle several materials in the process.

To make these colorful tiny candles, I used several materials that usually end up in a land fill: bottle caps, broken crayons, and empty soup cans. the only thing i bought to make them was the pre-waxed wicks which cost me $1.50 for a set of 12.

How to Make Bottle Cap Candles
supplies: bottle caps, crayons {or wax}, pre-waxed wicks, soup cans, wax paper {optional}, small cooking pan, scissors, and water

remove paper from crayons. you can also use candle wax if you wanted.

put crayons in clean, empty soup cans.

take your pre-waxed wicks and…

bottle caps

put wicks inside the bottle caps. i placed my bottle caps on wax paper in case i spilled some wax.

then using a small cooking pan filled with a couple inches of boiling water, place the can in the pan and melt the crayons. {you could also use a candle warmer to do this}the crayons melt pretty quickly. *note: it only takes a few crayons to fill a bottle cap!

pour the melted crayons or wax into the bottle caps.

let cool for 1-2 hours. then trim the wicks and you have some fun tea light candles to enjoy!

**added later: crayon wax does not smell that great when burned. if you plan to burn these candles, you may consider adding a scent to them**

DIY: Pinecone Candle Holder

Crissy's Crafts blog has a great fall DIY that would jazz up any home, or make a wonderful Thanksgiving table center piece?  We think so!  Check out their blog for more.

 Material:

pine cones, spray paint, the bottom of a soda can, glue gun and scissors

 Spray paint the pine cones

After it dries, cut the top of the pine cone and spray paint again. 

Cut the button of a soda can and trim around it.

 Glue the aluminum circle to the pine cone.

You are done!

DIY: Dipped Votives - Dollar Store Craft Idea

Nest of Posies made one of those dollar store crafts you know we like - since it's pretty and it's cheap!  We know she made them in bright summery colors (which are stunning), but we could totally see these in holiday colors - autumn, Christmas, etc. - with glitter or other funness!!

Check out her blog for more DIY!!

I used some votive candle holders I had from the Dollar Store & some craft paint.

Plastic bowls for dipping, newspaper & parchment paper for drying.

The only instruction I'll give, is once you start turning your votive around in the paint, don't pick it up until you are done.  

*Keep the votive against the side of the bowl that has the paint & continually move in circular motion until it is covered.*

DIY: Autumn Leaf Luminaries

We are either hit of miss with Martha Stewart's crafts - but this one we love!  Sometimes they can be just too detailed and complicated for our liking, but this one is just up our alley with simple materials and even more simple instructions.  You can get everything you need for cheap, and they look expensive - bonus!

Tools and Materials
- Fallen leaves

- Colored paper treat bags, matte-colored SOS in Sunbrite size No. 6, and Orange size No. 4, $10.10 to $11.19 per 100, from Paper Mart

- Acrylic paint (in colors that contrast with bags)

- 2-ounce misting bottle (176062), $1.29, from The Container Store

Autumn Luminarias How-To:
1. Collect fallen leaves, and arrange them on top of colored-paper treat bags.

2. Put 1 teaspoon acrylic paint (choose colors that contrast with bags) in a 2- to 3-ounce misting bottle. Fill halfway with water and shake to mix. Mist bags and leaves. Let dry 20 minutes. Remove leaves. Repeat on other side. Fill bottom of each bag with sand.

3. Illuminate: For safety reasons, use either glass holders that are three times as tall as candles or substitute battery-operated lights.